Hydraulic angle cut, angle cut, split hydraulic angle cut 



 Split hydraulic angle steel cut applies to the field with no power source, such as the power supply system or blanking of the construction site. The hydraulic angle cut high-strength alloy tool steel precision casting forming, high quality; split hydraulic angle cut device fracture smooth, neat and burr-free, high power, just a few seconds and cut off the angle; mainly used for tower plants, transmission and distribution construction site cut. 



 The split hydraulic angle cut by electric or manual pumps, high pressure hose, quick connector, the working cylinder and bracket, base, etc.. Pump to produce pressure oil through a high pressure hose enter the working cylinder, push the piston and the piston on the blade to cut off the angle iron bracket blade movement. The need to make the adjustment nut sticks Cheng cut off the angle iron, angle iron the tank so as not to undermine the blade. Angle iron off backward, and not allow the blade to continue the downward movement, the need to reply on the blade, in order to avoid edge damage and the base unit. As above, under the blade wear, need grinding blade. On the blade angle of 5 ° -8 °, under the blade angle is 0 °. 



 The split hydraulic angle cut off the main technical parameters are as follows: